Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Intended use
The tool is intended for trimming hedges.
Noise
Applicable standard : EN62841-4-2
DUH507
DUH607
NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual use of the power tool can differ from the declared val-
ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
Vibration
The vibration total value (tri-axial vector sum) determined according to EN62841-4-2:
DUH507
DUH607
NOTE: The declared vibration total value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power tool can differ from the declared
value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
Model
Model
Sound pressure level
L
(dB(A))
Uncertainty K
pA
(dB(A))
74
73
Front handle
2
ah (m/s
)
Uncertainty K
(m/s
2
2.5 m/s
or less
1.5
2
2.5 m/s
or less
1.5
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
8 ENGLISH
Sound power level
L
(dB(A))
WA
3
85
3
84
Rear handle
2
ah (m/s
)
2
)
2
2.5 m/s
or less
2
2.5 m/s
or less
Uncertainty K
(dB(A))
3
3
Uncertainty K
2
(m/s
)
1.5
1.5
Werbung
Inhaltsverzeichnis
