SYMA X220W Bedienungsanleitung Seite 15

Headless mode
1. Configuring the forward direction
When you switch on the drone for the first time, the direction in which the front side of the
drone is pointing will be set as the forwards direction.
2. Enabling headless mode
① After pairing the remote control with the drone, hold down the right joystick for
approximately 3 seconds. The remote control will beep 8 times to indicate that headless
mode is enabled. To disable headless mode, hold down the right joystick again for
approximately 3 seconds.
② In headless mode, you do not need to determine the drone orientation. You can move the
joysticks on the remote control to make the drone move in the corresponding direction.
The indicator on the drone will flash once every 4 seconds.
12