Upgrade Firmware - Velleman CAMIP5N1 Bedienungsanleitung

Network Configuration
Use this window to view or change the network settings of the camera.
 When connected to a DHCP router, check the Obtain IP from DHCP server checkbox, otherwise uncheck it
and fill in the data manually.
 In case of a subnet mismatch, change the IP-address or subnet mask.
 When in doubt about the network settings, contact a qualified network administrator.

Upgrade firmware

 Only use this option when problems with the current version are noticed. Do not upgrade if the camera
works fine.
 Caution: when the upgrade process is interrupted or a wrong version is installed the camera might not work
anymore.
Refresh Camera List
Use this option to update the camera list, for example when a new camera is added to the network.
Flush ARP Buffer
When both a wireless and wired connection to a camera exists, a problem with the ARP (Address Resolution
Protocol) may arise resulting in the camera not being accessible via the browser.
In this case the ARP buffer should be flushed.
About IP Camera Tool
This window shows details about the IP Camera Tool.
V. 05 – 04/06/2015
CAMIP5N1
8 ©Velleman nv