Velleman CAMIP5N1 Bedienungsanleitung Seite 13

11.13 MSN Settings
Access the camera with MSN
Function
The MSN feature allows you or the friends from your list to chat to the camera to find out its IP address.
This can be useful if you have lost the camera's IP address.
Note
It is recommended to create a new MSN account for the camera. When the camera login uses the MSN account,
this account cannot be used for anything else when the camera works.
Set-up
1. Enter the User and Password of the MSN account you will use for the camera (see image above).
2. Add the MSN account of your friends in the friends list and click Submit.
3. Go to the Device Status page of the settings and check whether the MSN status indicates "Succeed".
4. Next, open MSN Messenger and log into your account.
5. The name of the camera will appear in the friends or contacts list.
6. Open a chat session with the camera username and type url?
7. The camera will reply with its URL.
11.14 FTP Service Settings
These settings will only take effect if the option Upload Image on Alarm is selected in the Alarm Service
Settings (see below).
11.15 Alarm Service Settings
 Select the checkbox Motion Detect Armed to enable motion detection.
This also allows mails to be sent out (see Mail Service Settings) and image upload to an FTP server (see FTP
Service Settings).
Note: when the camera is in auto tilt or auto pan mode, motion detection and external alarm input are
disabled.
 The motion detect sensibility can be set between 1 and 10, with 10 being most sensitive.
V. 05 – 04/06/2015
CAMIP5N1
13 ©Velleman nv