Inhaltsverzeichnis
Werbung
4.
Once
the
DC: If the polarity is reversed a "Minus sign" is displayed.
5.
If the voltage is less than 0,5 V (DC) or 0,8 V (AC), the resistance of the
part or circuit is displayed.
Frequency measurement
1.
Measure alternating voltage or alternating current as described above.
2.
Press the SEL button to view the frequency.
Resistance measurement / Audible continuity
Attention!
Disconnect the power supply and unload all capacitors before you do the
measurement.
1.
Switch the unit on with the main switch (1).
2.
Attach the pin-plug of the black test lead to the COM-jack and the
pin-plug of the red test lead to the multi-function jack.
3.
Touch the measuring points with the probe tips.
4.
Once the reading stabilizes, read the value.
Audible continuity: If there is a resistor < 30 Ω, you hear a beep. When
the circuit is open, the display shows "OL".
Non Contact Voltage tester
To turn on the NCV function, press the NCV key for two seconds. The NCV
symbol appears on the display.
Keep the tip of the measuring device to a power outlet or a cable and press
the NCV key. In the presence of dangerous voltage, a signal tone sounds and
the NCV indicator (6) lights up.
reading
stabilizes,
29
read
the
English
value.
Werbung
Inhaltsverzeichnis
