Technical Data - BOMANN GSPE 7414 TI Bedienungsanleitung, Garantie

Malfunction / cause / action
Black, gray stains
Dishes were in contact with aluminum parts. Use a
mild scouring agent to remove these stains.
Stains on inner pan
Only use cleaning agents without dyes.
White film inside the appliance
Minerals in hard water: Use a damp sponge with
dishwasher detergent. Wear rubber gloves when
doing so.
Unsatisfactory drying result
- Incorrect loading.
- Dishes are removed too early.
- Incorrect program selection.
- Use of cutlery with poor coating.
Error codes
In case of some malfunctions, the appliance displays the following error codes to warn you:
Indicator lights flash
ECO
CAUTION:
• In case of water leakage, close the main valve
before contacting an authorized technician.
• If there is water in the lower part of the housing
due to overfilling or a small leak, remove this wa-
ter before restarting the appliance.
NOTE:
If a problem persists after following the steps above,
contact your distributor or an authorized technician.
Meaning / possible cause
Water supply malfunction!
Faucet not open, inlet blocked or water pressure too low.
Malfunction of the heating element! Rinsing temperature is not reached.
Overflow / water leakage!
Communication error between main and display board.

Technical data

Electrical connection / water supply........................
Connection voltage: ..................220-240 V~ / 50 Hz
Rated power: .................................1760 – 2100 W
Rated current: .............................................10 A
Water pressure: ................................0.04 – 1 Mpa
Dimension H x W x D / weight................................
Unit size: ..............................81.5 x 59.8 x 57.0 cm
Net weight: ..........................................ca. 32.3 kg
Available accessory............................................
Inlet hose safety system: .............Art.-No. 8900 410
43