BOMANN GSPE 7414 TI Bedienungsanleitung, Garantie Seite 39

General information!
• The ECO program is suitable for cleaning normally soiled dishes, which is the most efficient program in
terms of combined energy and water consumption. The program is used to check compliance with EU
ecodesign legislation.
→ Informationen for the comparability test:
Capacity: 12 settings; Position of upper basket: lower position; Rinse aid setting: max; Softener setting: H3
• Loading the domestic dishwasher to the specified capacity helps to save energy and water.
• Manual pre-washing of the dishes leads to higher water and energy consumption!
• Washing dishes in a household dishwasher generally uses less energy and water than hand washing,
provided the dishwasher is used according to the instructions.
Operating overview
1 Ein/Aus: button for switching the power supply
on/off. The indicator light shows the power supply.
2 Programm: program selection button for selecting
a rinsing program.
3 Startvorwahl: button for selecting the start delay
of 3, 6, or 9 hours. Set the operating conditions
and start the rinsing program. The appliance
starts automatically after the selected time has
elapsed.
4 : button to activate/deactivate the ½ loading
function. Consider that the function is program
dependent!
5 Start/Pause: button for starting/interrupting the
selected or running rinsing program.
6 The indicator lights show the selection of the ris-
ing program.
7 Warning lamp: lights up when dishwasher salt
needs to be refilled.
Warning lamp: lights up when rinse aid needs
to be refilled.
Indicator light: lights up when the ½ loading
function is activated.
8 The indicator lights show the selection of the start
delay.
Starting a program
• The water supply must be opened to the maxi-
mum pressure.
• Load the dishwasher baskets.
• Fill in the detergent.
• Switch on the appliance.
• Set the required program options.
• Start the operation.
39