Herunterladen Inhalt Inhalt Diese Seite drucken

After-Sales Service And Application Service - Bosch AdvancedChain 36V-35-40 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für AdvancedChain 36V-35-40:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3
– Remove the SDS cover (17), chain bar (12) and saw
chain (13) and clean these parts with a brush to remove
oil, sap and dust residue, especially from the saw blade
groove.
– Use a clean cloth to carefully remove debris from the oil
outlet (7) and drive sprocket (3). Make sure that no
debris enters the oil outlet (7), as this can cause block-
ages and lubrication problems.
– Carry out the required maintenance before use.
– Regularly check the chain saw for obvious defects such as
loose, dislodged or damaged saw chain and chain bar,
loose fixings and worn or damaged components.
– Do not modify this product. Unauthorized modifications
may impair the safety of your product and may result in
increased noise and vibration.
– Always empty the oil reservoir before storage and refill it
before use.
– Store the chain saw in a secure, dry place, out of the
reach of children.
– Do not place other objects on the chain saw.
Replacing and Sharpening the Saw Chain
– The saw chain can become blunt through prolonged use
or when coming into contact with objects other than
wood.
– A sharp saw chain is required for optimum performance
and safety.
– Never sharpen the saw chain yourself unless you have ex-
perience with it.
– Replace the saw chain with the Bosch saw chain access-
ory or have the saw chain professionally resharpened.
Replacing the Chain Bar
Only replace the chain bar if you fully understand the
u
product and the instructions, otherwise please con-
tact the Bosch Service Centre.
– If the chain bar is worn, you can mount it upside down to
extend its life, or you can replace it.
– Use a hex key to loosen the screw between the chain
bar (12) and the affixed tensioning wheel (14).
– Once you have flipped or replaced the chain bar, reattach
the affixed tensioning wheel (14).
Note: Tighten by hand until you feel a slight resistance, then
perform 1/8 turn for proper fastening. Overtightening can
cause the chain bar to pinch and restrict the path of the ro-
tating saw chain.
Chain bar
AdvancedChain 36V-35-40

After-Sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
Bosch Power Tools
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Transport
The recommended lithium-ion batteries are subject to legis-
lation on the transport of dangerous goods. The user can
transport the batteries by road without further require-
ments.
When shipping by third parties (e.g.: by air transport or for-
warding agency), special requirements on packaging and la-
belling must be observed. For preparation of the item being
shipped, consulting an expert for hazardous material is re-
quired.
Dispatch battery packs only when the housing is undam-
aged. Tape or mask off open contacts and pack up the bat-
tery in such a manner that it cannot move around in the
packaging. Please also observe the possibility of more de-
tailed national regulations.
Disposal
Only for EU countries:
According to the European Guideline 2012/19/EU, products
that are no longer usable, and according to the European
Guideline 2006/66/EC, defective or used battery packs/
batteries, must be collected separately and disposed of in an
Oregon 144MLEA041
environmentally correct manner.
If disposed incorrectly, waste electrical and electronic
equipment may have harmful effects on the environment and
human health, due to the potential presence of hazardous
substances.
Battery packs/batteries:
Li-ion:
The product, batteries, accessories and pack-
aging should be sorted for environmental-
friendly recycling.
Do not dispose of the product and batteries/re-
chargeable batteries into household waste!
F 016 L81 992 | (25.01.2023)
English | 23

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis