Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Adjustment of the machine
CAUTION! Unplug the machine from the power source before making any adjustments. Failure to
heed these instructions may cause serious injuries!
Mitre cutting
The CS225 metal cutting saw is able to make 45° mitre cuts. Follow the steps below for adjusting the
cutting angle.
1. Loosen the two bolts (A, fig.3) using a 16mm wrench, now the saw head is able to turn.
2. Now adjust the saw angle upto 45°, you can read the angle on the scale on the machine base.
3. When the saw is in the desired angle, tighten the 2 bolts (A, fig.3) firmly.
Fig. 3
16
Werbung
Inhaltsverzeichnis
