S&P JETLINE 100 Bedienungsanleitung Seite 14

material and packaging in their correspond-
ing recycling containers and hand in the re-
placed units to the nearest handler of this
EN
type of waste product.
The fan unit is mainly made of steel, copper,
ferrite, aluminium and plastic. These com-
ponents should be recycling in the following
categories:
- Steel and iron
- Aluminium
- Non-ferrous metals
- Plastics
- Insulating materials
- Cables
- Electronic scrap
To clarify any questions regarding S&P
products contact your local distributor. For
its location and to obtain the EU Declaration
of Conformity certifi ed technical data sheet
and copy of this instruction manual, see our
web site www.solerpalau.com
INFORMATION REQUIREMENTS FOR RVU
a Trade mark
b Identifi er
c SEC average climate (kWh/(m
SEC class
SEC cold climate (kWh/(m
SEC warm climate (kWh/(m
d Typology
e Type of drive
f Type of HRC
g Thermal effi ciency (%)
h Maximum fl ow rate (m
i Electrical power input at maximum fl ow
rate (W)
j Sound power level (LWA)
k Reference fl ow rate (m
l Reference pressure difference (Pa)
m SPI (W/m
n Control factor
Control typology
14
2
2
.an))
2
.an))
3 /h)
3
/s)
3
/h)
o Maximum internal leakage for BVU (%)
Maximum external leakage for BVU and
UVU (%)
p Mixing rate for BVU without duct con-
nection (%)
q Position of visual fi lter warning
description of visual fi lter warning
r Instructions to install supply grilles
Instructions to install exhaust grilles
s Internet address
t Airfl ow sensitivity to pressure variation
u Indoor/outdoor air tighness (m
v Annual electricity consumption - Aver-
age climat (kWh/a)
Annual electricity consumption - Warm
climat (kWh/a)
Annual electricity consumption - Cold
climat (kWh/a)
w Annual heating saved - Average climat
(kWh/a)
Annual heating saved - Warm climat
(kWh/a)
Annual heating saved - Cold climat
(kWh/a)
.an))
3
/h)