Thomashilfen EASyS Advantage Montageanleitung Seite 5

Soft pelvic harness Item code : 6614 (size 1) / 6714 (size 2)
Place soft pelvic harness with the gray side upwards onto the seat (metal eyelets
pointing backwards in direction of travel). (fig. 1)
For size 2, the length of the rear straps can be adjusted using the folding buckles.
Swifty and Swifty 2: Open the prefabricated slots in the rear part of the seat
cushion and fasten the belts (with metal eyelets).
Swifty: Loosen the two screws of the rear seat plate and fix the belts with them
(fig. 2).
Swifty 2: Loosen the two soft-touch handles under the seat and fasten the two
rear straps (with metal eyelets). (fig. 3)
Other models: Insert the rear straps between the seat and back upholstery and
fasten them to the rear screws of the seat plates using the soft touch handles. (fig. 4)
The front straps are guided laterally through the pads or pads and fastened in
the appropriate folding buckles. These are located under the seat plate, laterally
or on the back plate. (fig. 5)
Finally, close the backrest upholstery again (if available).
TIP: The belt length can also be adjusted from the front. Pull the D-ring to shor-
ten the belt.
5