Warranty; Technical Data; Vibration And Noise Value; Declaration Of Conformity - Kärcher HGE 18-50 Battery Bedienungsanleitung

Fault
The device does not start
up
The device stops during
operation

Warranty

The warranty conditions issued by our sales company
responsible apply in all countries. We shall remedy pos-
sible malfunctions on your device within the warranty
period free of cost, provided that a material or manufac-
turing defect is the cause. In a warranty case, please
contact your dealer (with the purchase receipt) or the
next authorised customer service site.
(See overleaf for the address)

Technical data

Device performance data
Working voltage of the battery
Idling speed (normal setting)
Cut material diameter (max.)
Determined values in acc. with EN 62841-1, EN
62841-4-2
Sound pressure level L
pA
Uncertainty K
pA
Sound power level L + uncer-
WA
tainty K
WA
Front handle hand-arm vibration
value
Rear handle hand-arm vibration
value
Uncertainty K
Dimensions and weights
Length x width x height
Cutting blade length
Weight (without battery pack)
Subject to technical modifications.

Vibration and noise value

The declared vibration total values and the declared
noise emission values have been measured in accord-
ance with a standard test method and may be used for
comparing one tool with another.
The declared vibration total values and the declared
noise emission values may also be used in a preliminary
assessment of exposure.
Cause
Battery pack is not inserted correctly.
Battery pack is empty
Battery pack is defective.
Blade blocked with cutting material.
The battery has overheated
Motor has overheated
HGE 18-
50
V 18
/min 1350 +/-
10%
mm 22
dB(A) 80,2
dB(A) 3,0
dB(A) 93
2
m/s 1,6
2
m/s 1,3
2
m/s 1,5
mm 970 x
213 x
188
mm 500
kg 2,9
Rectification
 Push the battery pack into the mounting
until it latches into place.
 Charge the battery pack.
 Replace the battery pack.
 Remove cutting material from the blade.
 Stop working and allow the battery to cool
down to normal battery temperature.
 Stop working and allow the motor to cool
down.
WARNING
The vibration and noise emissions during actual use of
the power tool can differ from the declared values de-
pending on the ways in which the tool is used especially
what kind of workpiece is processed.
Identify safety measures to protect the operator that are
based on an estimation of exposure in the actual condi-
tions of use (taking account of all parts of the operating
cycle such as the times when the tool is switched off and
when it is running idle in addition to the trigger time).
Device with a hand-arm vibration value >
2.5 m/s² (see chapter Technical Data in the
operating instructions)
CAUTION
for several hours can lead to numbness. ● Wear warm
gloves to protect your hands. ● Take regular breaks
from work.

Declaration of Conformity

EU Declaration of Conformity
We hereby declare that the machine described below
complies with the relevant basic safety and health re-
quirements in the EU Directives, both in its basic design
and construction as well as in the version placed in cir-
culation by us. This declaration is invalidated by any
changes made to the machine that are not approved by
us.
Product: Hedge trimmer
Type: HGE 18-50 Battery 1.444-24x.0
Currently applicable EU Directives
2000/14/EC (+2005/88/EC)
2014/30/EU
2006/42/EC (+2009/127/EC)
2011/65/EU
Harmonised standards used
EN IEC 63000:2018
EN 55014-1: 2017 + A11: 2020
EN 55014-2: 1997+A1: 2001+A2: 2008
EN 62841-1:2015+A11:2022
EN 62841-4-2:2019+A1:2022+A11:2022
Conformity evaluation procedure used
2000/14/EC and amended by 2005/88/EC: Annex V
(with shrub blade only)
Sound power level dB(A)
Measured:91,2
Guaranteed:93
The signatories act on behalf of and with the authority of
the company management.
English
● Uninterrupted use of the device
19