Functional Description - Makita PM001G Betriebsanleitung

5. L o o s e n t h e s c r e w o n t h e h o s e c l a m p , a n d t h e n
attach the hose clamp to the flexible pipe. Attach the
flexible pipe to the elbow, and then tighten the screw on
t h e h o s e c l a m p .
Fig.6: 1. Flexible pipe 2. H o s e c l a m p 3. Elbow
NOTICE:
Make sure that the screw on the hose
clamp is not facing outward as shown in the
figure.
Fig.7: 1. S c r e w
6. Clamp the control cable to the cable holders.
Fig.8: 1. Cable holder 2. Control cable
NOTICE:
Make sure that the control cable is
securely fixed to the cable holder.
Adjusting the belt and shoulder
harness
1.
Put on the machine, then lock the buckle of the
waist belt, and then adjust the length of the waist belt.
Fig.9: 1. B u c k l e
2. Adjust the length of the shoulder harness.
Fig.10: 1. S h o u l d e r h a r n e s s
Adjusting the control lever position
L o o s e n t h e c l a m p s c r e w . M o v e t h e c o n t r o l h a n d l e a l o n g
the swivel pipe to the most comfortable position, and
t h e n t i g h t e n t h e c l a m p s c r e w .
Fig.11: 1. C o n t r o l h a n d l e 2. S w i v e l p i p e 3. C l a m p
s c r e w
Attaching the di usion cover
You can di use the mist by attaching the di usion cover
to the end nozzle as shown in the figure.
Fig.12: 1. Di usion cover
Attaching the deflector
Optional accessory
You can discharge the mist upward or downward by
attaching the deflector to the end nozzle as shown in
the figure.
Fig.13: 1. Deflector
FUNCTIONAL
DESCRIPTION
CAUTION:
Always be sure that the machine
is switched o and all the battery cartridges are
removed before adjusting or checking function on
the machine.
Installing or removing battery
cartridge
CAUTION:
Always switch o the machine
before installing or removing of the battery
cartridge.
CAUTION:
Hold the machine and the battery
cartridge firmly when installing or removing bat-
tery cartridge. F a i l u r e t o h o l d t h e m a c h i n e a n d t h e
battery cartridge firmly may cause them to slip o
y o u r h a n d s a n d r e s u l t i n d a m a g e t o t h e m a c h i n e a n d
battery cartridge and a personal injury.
CAUTION:
Make sure that you lock the battery
cover before use. O t h e r w i s e , m u d , d i r t , o r w a t e r m a y
cause damage to the product or the battery cartridge.
CAUTION:
Always install the battery cartridge
fully until the red indicator cannot be seen. I f n o t ,
i t m a y a c c i d e n t a l l y f a l l o u t o f t h e m a c h i n e , c a u s i n g
injury to you or someone around you.
CAUTION:
Do not install the battery cartridge
forcibly. I f t h e c a r t r i d g e d o e s n o t s l i d e i n e a s i l y , i t i s
not being inserted correctly.
CAUTION:
Hold the battery cover firmly when
installing or removing the battery cartridge.
To install the battery cartridge ;
1. P u l l u p t h e l o c k i n g l e v e r u p w a r d , a n d t h e n o p e n
the battery cover.
Fig.14: 1. L o c k i n g l e v e r 2. B a t t e r y c o v e r
2. Align the tongue on the battery cartridge with the
s l o t o n t h e m a c h i n e , a n d t h e n s l i d e t h e c a r t r i d g e u n t i l i t
l o c k s i n p l a c e w i t h a l i t t l e c l i c k .
Fig.15: 1. B a t t e r y c a r t r i d g e
3. Close the battery cover and push it until it is
l a t c h e d w i t h t h e l o c k i n g l e v e r .
To remove the battery cartridge ;
1. Pull up the locking lever and open the battery
c o v e r .
2.
Pull out the battery cartridge from the machine
while sliding the button on the front of the cartridge.
Fig.16: 1. B a t t e r y c a r t r i d g e
3. Close the battery cover.
17 ENGLISH