Attaching The Rackmount Ears - Tascam SB-16D Bedienungsanleitung

Attaching the rackmount ears

Before mounting this unit in a 19 inch rack, you must replace the
feet with the included rackmount ears. Follow these procedures
to attach the rackmount ears. (Prepare a Phillips screwdriver in
advance.)
1.
Remove the 4 attached screws as shown in the illustration
below, and remove the 4 feet from the ends of the unit.
2.
Attach the included rackmount ears to the unit using the
included rackmount ear installation screws.
10
TASCAM SB-16D
NOTE
i Reverse these procedures to reinstall the feet that were
originally attached to the unit.
i By changing the attachment positions of the rackmount
ears, the unit can be mounted in a rack with its front panel
recessed by 20, 40 or 60 mm.
Furthermore, the rackmount ears can be attached
backwards.