Herunterladen Inhalt Inhalt Diese Seite drucken

Precautions For Placement And Use; Beware Of Condensation; Cleaning The Unit; Using The Teac Global Site - Tascam BO-32DE Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für BO-32DE:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 21

Precautions for placement and use

0 Do not install this unit in the following types of locations. Do-
ing so could cause malfunction.
Locations with frequent vibrations
Near windows or other places exposed to direct sunlight
Near heaters or other extremely hot places
Extremely cold places
Very humid or poorly ventilated places
Very dusty places
0 Make sure that the unit is mounted in a level position for cor-
rect operation.
0 Do not place the unit on top of a power amplifier or other de-
vice that generates heat.

Beware of condensation

Condensation could occur if the unit is moved from a cold place
to a warm place, it is used immediately after a cold room has
been heated or it is otherwise exposed to a sudden temperature
change.
To prevent this, or if this occurs, let the unit sit for one or two
hours at the new room temperature before using it.

Cleaning the unit

Use a dry soft cloth to wipe the unit clean. Do not wipe with chem-
ical cleaning cloths, thinner, alcohol or other chemical agents. Do-
ing so could damage the surface or cause discoloration.

Using the TEAC Global Site

You can download this Owner's Manual necessary for this unit
from the TEAC Global Site (http://teac-global.com/).
In the TASCAM Downloads section, select the desired language
to open the Downloads website page for that language.

Product registration

Customers in the USA, please visit the following TASCAM website
to register your TASCAM product online.
http://tascam.com/

About TASCAM customer support service

TASCAM products are supported and warrantied only in their
country/region of purchase.
To receive support after purchase, on the TASCAM Distributors list
page of the TEAC Global Site (http:// teac-global.com/), search
for the local company or representative for the region where you
purchased the product and contact that organization.
When making inquiries, the address (URL) of the shop or web
shop where it was purchased and the purchase date are required.
Moreover, the warranty card and proof of purchase might also be
necessary.
TASCAM BO-32DE / BO-16DX/IN / BO-16DX/OUT
5

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Bo-16dx/inBo-16dx/out

Inhaltsverzeichnis