Usage - Beurer HC 100 Excellence Gebrauchsanweisung

5. USAGE

1� Wash hair as usual and then dry with a towel� Hairsprays contain
flammable substances, so do not use hairspray while using the device�
2� Stand on a dry, non-conductive surface and make sure your hands
are dry�
3� To switch on the hair dryer, slide the ON/OFF switch
I� The hair dryer displays the warm air and blower settings that were
last used�
4� Use the warm air button
warm air indicator
One red LED
Two red LEDs
Three red LEDs = hot air
Alternatively, press and hold the cold air button
setting� The warm air indicator
5� Use the blower button
indicator
5
One white LED
Two white LEDs
Three white LEDs = high blower setting
6� Dry and/or style your hair as you wish�
7� Switch off the hair dryer after each use or upon interruption� To switch
off the hair dryer, slide the ON/OFF switch
warm air indicator
8� Remove the mains plug from the socket�
9� Allow the hair dryer to cool completely on a fireproof surface�
to set the desired temperature setting� The
2
shows the current setting in colour�
3
= warm air
= very warm air
4
shows the current setting in colour�
= low blower setting
= medium blower setting
and the blower indicator
3
goes out�
3
to set the desired setting� The blower
20
up to setting
1
to use the cold air
6
down to setting 0� The
1
go out�
5