Options; Before First Use - AEG FFB83816PM Benutzerinformation

46 www.aeg.com
How to deactivate AirDry
Make sure the appliance is in user mode.
1. Press
• The indicators
and
• The indicator

7. OPTIONS

Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
Not all options are
compatible with each other.
If you select non compatible
options, the appliance
automatically deactivates
one or more of them. Only
the indicators of the still
active options are on.
If an option is not applicable
to a programme, the related
indicator is off or it flashes
quickly for a few seconds
and then goes out.
Activating options can affect
the water and energy
consumption as well as the
programme duration.
7.1 Extra Hygiene
This option provides better cleaning
results by keeping the temperature
between 65 and 70 °C for at least 10
minutes during the last rinsing phase.
How to activate Extra
Hygiene
Press .

8. BEFORE FIRST USE

1. Make sure that the current level of
the water softener agrees with the
.
,
are off.
still flashes.
• The display shows the current
setting.
–
–
,
2. Press
3. Press on/off to confirm the setting.
The related indicator is on.
The display shows the updated
programme duration.
7.2 Extra Power
This option improves the dishwashing
results of the selected programme. It
increases the wash temperature and
duration.
How to activate Extra Power
Press .
The related indicator is on.
The display shows the updated
programme duration.
7.3 Glass Care
This option protects a delicate load,
glassware in particular, from damaging. It
prevents rapid changes in the
dishwashing temperature of the selected
programme and reduces it to 45 °C.
How to activate Glass Care
Press .
The related indicator is on.
The display shows the updated
programme duration.
= AirDry is deactivated.
= AirDry is activated.
to change the setting.