3.1 Beam-on-Floor
Beam-on-Floor is a light displayed on the
floor below the appliance door.
• When the programme starts, a red
light comes on and stays on for the
duration of the programme.
• When the programme is completed, a
green light comes on.
• When the appliance has a
malfunction, the red light flashes.
Beam-on-Floor is off when
the appliance is deactivated.
When AirDry is activated
during the drying phase, the
projection on the floor may
not be completely visible. To
see if the cycle is finished,
check the control panel.
4. CONTROL PANEL
On/off button
1
Display
2
Programme selection button
3
AUTO programme button
4
Delay button
5
4.1 Indicators
Indicator
1
Description
Salt indicator. It is on when the salt container needs refilling. It is always
off while the programme operates.
Rinse aid indicator. It is on when the rinse aid dispenser needs refilling. It
is always off while the programme operates.
3.2 Internal light
The appliance has an internal lamp. It
comes on when you open the door or
switch the appliance on while the door is
open.
The lamp goes off when you close the
door or switch the appliance off.
Otherwise, it goes off automatically after
some time to save energy.
5
2
3
4
Extra Hygiene button
6
Extra Power button
7
Glass Care button
8
Indicators
9
ENGLISH
6
7
8
9
39