Aircaps - Sagola PSAM500 Gebrauchsanleitung

6.- Disconnect the power supply cable (electric models).
7.- Open the drain valve after placing a container nearby in which to collect the product. Leave
the valve open until required for spraying.
If you have reason to believe the tip or the hose is completely clogged, or that the pressure has
not been totally eliminated after having followed the procedure described above, loosen the hose
connector VERY GENTLY in order to reduce the pressure gradually, and finally remove it altoge-
ther. Clean the tip or the hose immediately.
9. Nozzle chart (Tips)
9.1. Airless swivel caps
These tips are defined by the product tip size and the
spray width. Choose the right tip size and spray wid-
th in accordance with the product to be sprayed and
working surface. Each tip size defines a specific size
and spray width.
Name
Application
(swivel Sd V)
07 / 20
07 / 40
Enamels and paints
07 / 50
acrylics and
synthetics, oils, 09 / 20
unmolding
09 / 40
09 / 60
11 / 20
Resin-based
11 / 40
synthetic paints,
PVC paints
11 / 60
13 / 20
Enamels, Plastic
13 / 40
paints, Primers,
Putties
13 / 80
15 / 20
Filling materials,
15 / 40
Plastic paints
15 / 80
17 / 20
17 / 40
17 / 60
17 / 80
Anti-corrosion
18 / 20
paint,
18 / 40
Plastic paints
18 / 60
and primers
19 / 20
19 / 40
19 / 60
19 / 80
21 / 20
21 / 40
Fire protection
primers 21 / 60
21 / 80
23 / 20
23 / 40
Interior and exterior
coating 23 / 60
23 / 80
The fan size is indicative and will vary depending on the viscosity and the pressure at which we spray. Other
steps and angles available. Consult.
Nozzle Tip
Angle
(inches/mm.)
0.007"/0.18 20°
0.007"/0.18 40°
0.007"/0.18 50° 250-300 mm. (10-12")
0.009"/0.23 20°
0.009"/0.23 40°
0.009"/0.23 60° 300-355 mm. (12-14")
0.011"/0.28 20°
0.011"/0.28 40°
0.011"/0.28 60° 300-355 mm. (12-14")
0.013"/0.33 20°
0.013"/0.33 40°
0.013"/0.33 80° 405-457 mm. (16-18")
0.015"/0.38 20°
0.015"/0.38 40°
0.015"/0.38 80° 405-457 mm. (16-18")
0.017"/0.43 20°
0.017"/0.43 40°
0.017"/0.43 60° 300-355 mm. (12-14")
0.017"/0.43 80° 405-457 mm. (16-18")
0.018"/0.45 20°
0.018"/0.45 40°
0.018"/0.45 60° 300-355 mm. (12-14")
0.019"/0.48 20°
0.019"/0.48 40°
0.019"/0.48 60° 300-355 mm. (12-14")
0.019"/0.48 80° 405-457 mm. (16-18")
0.021"/0.53 20°
0.021"/0.53 40°
0.021"/0.53 60° 300-355 mm. (12-14")
0.021"/0.53 80° 405-457 mm. (16-18")
0.023"/0.58 20°
0.023"/0.58 40°
0.023"/0.58 60° 300-355 mm. (12-14")
0.023"/0.58 80° 405-457 mm. (16-18")
ENGLISH
Spray width Water flow
at 30 cm. a 100 bar
100-150 mm. (4-6")
0.18 L/min.
200-250 mm. (8-10")
100-150 mm. (4-6")
200-250 mm. (8-10") 0.25 L/min.
100-150 mm. (4-6")
200-250 mm. (8-10") 0.37 L/min.
100-150 mm. (4-6")
200-250 mm. (8-10") 0.57 L/min.
100-150 mm. (4-6")
200-250 mm. (8-10") 0.72 L/min.
100-150 mm. (4-6")
200-250 mm. (8-10")
0.98 L/min.
100-150 mm. (4-6")
200-250 mm. (8-10") 1.10 L/min.
100-150 mm. (4-6")
200-250 mm. (8-10")
1.30 L/min.
100-150 mm. (4-6")
200-250 mm. (8-10")
1.52 L/min.
100-150 mm. (4-6")
200-250 mm. (8-10")
1.83 L/min.
Gun filter
RED
RED
RED
RED
YELLOW
YELLOW
YELLOW
WHITE
WHITE
WHITE