Connection Diagram - Reflexion Dvd366 Bedienungsanleitung

CONNECTION DIAGRAM

- - - - - -
- - - -
Connect and switch on:
Connect the DVD player to your TV and/or amplifier as shown above.
Turn on the TV and select the appropriate input connector: HDMI or AV.
Connect the DVD player to an appropriate power source (AC100-240V~50/60Hz).
Press (POWER) on the front panel or remote control. The TV will display "Read" or "No
Disc", with or without a disc inserted.
Press (OPEN / CLOSE) on the front panel or remote control, the disc tray will open or
close automa�cally.
When a disc is inserted, the disc type is displayed in the upper le� corner of the screen.
Press (POWER) on the front panel or remote control to switch the unit to standby mode.
HDMI
VIDEO
L R
- - - - - - -
- - - -
30
UK