Proper Use; Technical Data - EINHELL GC-HC 90/2046 T Originalbetriebsanleitung

Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Electric pole pruner
•
Extension pipe
•
Saw chain
•
Cutter rail
•
Cutter rail guard
•
Shoulder strap
•
Multifunction tool (size 13/4 mm)
•
Original operating instructions
•
Safety instructions

3. Proper use

The electric pole pruner is designed for cutting off
branches from trees. It is not suitable for extensi-
ve sawing work, cutting down trees or sawing any
materials other than wood.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Mains voltage: .........................230-240 V~ 50 Hz
Power rating: ............................................ 900 W
Cutter bar length: ................................... 200 mm
Max. cutting length: ................................ 182 mm
Chain pitch: ................................. 3/8", 9.525 mm
Chain thickness: ........................ (0.043") 1.1 mm
Sprocket wheel: ............................... 6 teeth, 3/8"
Cutting speed at rated rpm (vu): ................11 m/s
Oil tank capacity: .................................... 100 cm
Weight excluding accessories: .................. 4.5 kg
Chain: .....................................Oregon 90PX033X
Cutter rail: ..........................Oregon 084MLEA041
Protection class: ...........................................II /
Anl_GC_HC_90-2046_T_SPK13.indb 21
GB
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with ISO 22868.
L sound pressure level ........................ 99 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level ..................... 104.9 dB(A)
WA
K uncertainty ........................................ 2.64 dB
WA
Guaranteed sound power level L
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three
directions) determined in accordance with
EN ISO 11680-1.
Handle under load
Vibration emission value
- Front handle a = 2.055 m/s²
h.
- Rear handle a = 2.635 m/s²
h.
Uncertainty K = 1.5 m/s²
The stated vibration emission levels and stated
noise emission values were measured in ac-
cordance with a set of standardized criteria and
can be used to compare one power tool with
another.
The stated vibration emission levels and stated
noise emission values can also be used to make
an initial assessment of exposure.
Warning:
The vibration and noise emission levels may vary
from the level specifi ed during actual use, depen-
ding on the way in which the power tool is used,
especially the type of workpiece it is used for.
Take appropriate measures to protect yourself
against vibration stress. Take the entire work
sequence into consideration including times at
which the tool is not working under load or is swit-
ched off . Appropriate measures include among
other things regular care and maintenance of the
tool and tool attachments, keeping your hands
warm, taking regular breaks and good work se-
3
quence planning.
- 21 -
........... 108 dB
WA
09.11.2022 15:08:58