GreenWorks 2101207 Bedienungsanleitung Seite 3

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SV HR HU RO BG EL AR TR HE LT LV ET
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.
ATTACHING GRASS DEFLECTOR See Figure 2-3.
Avoid contact with the blade. Failure to avoid contact
can result in serious personal injury.
„ Using a phillips screwdriver, remove the screw from the
trimmer head.
„ Fit the grass deflector onto the raised posts on the
trimmer head.
„ Reinstall the screw and tighten by turning clockwise.
Do not allow familiarity with products to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
Always wear eye protection. Failure to do so could
result in objects being thrown into your eyes resulting in
possible serious injury.
Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended
can result in serious personal injury.
INSTALLING THE LOWER SHAFT TO THE UPPER
SHAFT See Figure 4.
„ Push in the rotating handle latches located on the
lower shaft. Align the latches with the positioning hole
on the upper shaft.
„ Slide the lower shaft into the upper shaft until the
rotating handle latches engage in the positioning hole.
„ Insert the screws into the shaft, fastening the lower
shaft in place.
English (original instructions)
WARNING
WARNING
WARNING
WARNING
WARNING
OPERATION
TO INSTALL BATTERY PACK See Figure 5.
„ Place the battery pack in the trimmer. Align raised ribs
on battery pack with grooves in the trimmer's battery
port.
„ Make sure the latch on bottom of the battery pack
snaps in place and that battery pack is fully seated and
secure in the trimmer before beginning operation.
TO REMOVE BATTERY PACK See Figure 5.
„ Press and hold the battery latch button at the bottom of
the battery pack.
„ Remove battery pack from the trimmer.
STARTING/STOPPING THE TRIMMER See Figure 6.
„ To start the line trimmer, push the lock-out button (1)
and pull the switch trigger (2).
„ To stop the line trimmer, release the switch trigger.
Noise. A degree of noise from the machine is not
avoidable. Route noisy work is to be licensed and limits
for certain periods. Keep rest periods and they may
need to restrict the working hours to a minimum.
For their personal protection and protection of people
working nearby, an appropriate hearing protection shall
be worn;
Vibration. Always wear safety and anti-vibration glove.
Excessive vibration may cause white finger disease or
carpal tunnel syndrome. If you notice an unpleasant
sensation or skin discoloration during use of the
machine on your hands once you stop working. Place
an adequate work breaks. And continual and regular
users should monitor closely the condition of their hands
fingers.
Contact with the trimmer cutting head while operating
can result in serious personal injury.
2
WARNING
WARNING