Setting Up The Scale; Inserting The Batteries - ADE MV304600 Serie Betriebsanleitung

First use

Setting up the scale

NOTICE!
Risk of damage!
The scale can get damaged due to overload.
– Do not place excessive pressure on the scale.
– Place the scale
incorrect measurement results.

Inserting the batteries

WARNING!
Risk of explosion or fire!
Incorrect installation of batteries can lead to a short circuit or over-
load, causing a rapid battery temperature rise. Battery overheating
may lead to gas or battery fluid leakage or explosion, which, in turn,
may result in injury.
– Make sure that the polarity is correct when inserting the
batteries.
1
36
on a level surface. Using the scale on a tilted surface can lead to
1
1. Open the battery compartment. Press the lock of
the battery compartment cover
the side (see Fig. 1).
6
Dok./Rev.-Nr. MV304600-221012-Rev001-en
slightly to
6