Playing A Disc; Pausing Playback (Still Mode); Stopping Playback; Fast Forward / Fast Reverse - Muse M-700DP Bedienungsanleitung

Basic playback
This owner's manual explains the basic instructions for operating this unit. Some DVDs are produced in
a manner that allows specifi c or limited operation during playback. Therefore, this unit may not respond
to all operating commands. THIS IS NOT A DEFECT. Please refer to the instructions accompanying the
specifi c DVD in question for more information about the options available on that DVD.
" " may appear on the screen during operation. A "
permitted by the unit or disc.

Playing a Disc

1. Slide the CHARGE / STANDBY / ON switch on the left side of the unit to the ON position.
See CUSTOMIZING THE FUNCTION SETTINGS before proceeding to step 2.
2. Slide the open knob rightwards to open the disc door.
3. Hold the disc by its sides and carefully place it onto the spindle with the label side
facing up, pushing gently until you hear a "click".
4. Close the disc door. It takes a short while for your unit to load the disc. After loading, the
unit will automatically bring you to the main menu of the DVD or start playing the DVD.
5. If the unit does not automatically start playing the DVD, press the

Pausing Playback (Still Mode)

Press the PAUSE button. To resume normal playback, press the
Each time you press the PAUSE button, the picture advances one frame.

Stopping Playback

Press the STOP button at the location where you want to interrupt playback. To resume playback at the position
where the disc was stopped, press the
If you press the STOP button twice, the unit's memory will be cleared and pressing the
the DVD to the beginning.

Fast Forward / Fast Reverse

1. Press the SEARCH or
SEARCH button, the playback speed changes in the following sequence:
2x 2x 4x 4x
2. Press the PLAY button when you reach the desired point to resume normal playback.
Notes:
• The DVD player mutes sound and subtitles during reverse and forward scan of DVDs.
• The fast playback speed may differ depending on the disc.

Skip (Forward / Reverse)

• Press the NEXT button to advance chapters/tracks.
• Press the PREV button to go back to current or previous chapters/tracks.
• For an Audio CD, use the number buttons on the remote control to jump directly to the desired track number.

Audio Selection

On some DVDs, the sound is recorded in two or more formats. Follow the directions below to select the preferred
language and sound system.
1. While a disc is playing, press the AUDIO button to show the current audio format number.
2. Press the AUDIO button repeatedly to select the desired audio format.
Notes:
• If only one audio format is recorded, the number does not change.
• About two seconds later, playback continues in the new audio format.
PLAYING A DISC
PLAY button.
SEARCH button when a disc is playing. Each time you press the SEARCH
8x 8x 16 x 16 x
Audio 1/3:Dolby D 2ch English Audio 1/3:Dolby D 2ch English
GB-11
" means that the desired operation is not
PLAY button.
PLAY button.
PLAY button will reset
2x 2x 4x 4x 8x 8x
or
16 x 16 x