Safety Instructions - Muse M-700DP Bedienungsanleitung

WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
INVISIBLE LASER RADIATION WHEN
OPEN AND INTERLOCKS DEFEATED.
AVOID EXPOSURE TO BEAM.
The symbol for Class II
(Double lnsulation)
On Placement
• Do not use the unit in places that are extremely hot, cold, dusty, or humid.
On Safety
• When connecting or disconnecting the AC adaptor, grip the plug and not the cord itself. Pulling the cord may
damage it and create a hazard.
• When you are not going to use the unit for a long period of time, disconnect the AC adaptor.
On Condensation
• When left in a heated room where it is warm and damp, water droplets or condensation may form inside the unit.
When there is condensation inside the unit, the unit may not function normally. Let the unit stand for 1 to 2 hours
before turning the unit on, or gradually heat the room up and allow the unit to dry before use.
Ventilation Warning
• Do not block the ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper
or cloth, etc., the heat may not be able to get out.)
• Do not operate the unit in a confi ned space, such as a bookcase or built-in cabinet, allow about 10cm of free
space all around the unit for adequate ventilation.
Rating Plate Location
• The rating plate is located on the bottom of the unit.
WARNING:
• Should any trouble occur, disconnect the AC adaptor and refer servicing to a qualifi ed technician.
• Do not allow the unit to be exposed to dripping or splashing. No objects fi lled with liquids, such as vases,
shall be placed on the unit.
• The AC adaptor is used as the disconnect device and it shall remain readily operable. If a malfunction
occurs, disconnect the AC adaptor from the wall outlet at once.

SAFETY INSTRUCTIONS

This product contains a
low power laser device.
GB-1
The lightning flash with an arrowhead symbol,
within the equilateral triangle, is intended to alert
the user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may be
of suffi cient magnitude to cause an electric shock.
The exclamation point within the equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in this owner's manual.
* SEE BOTTOM OF UNIT FOR
GRAPHIC SYMBOLS *
This symbol means that the unit complies
with European safety and electrical
interference directives.