Lievers HAL200Li Montageanleitung Seite 11

6. Open the battery cover and insert the battery by sliding it into the housing through the
provided slots until it clicks. Then close the battery cover.
Figure 10: Inserting the battery pack
7. Check the battery status via the battery indicator on the front of the machine.
11/79 Gebruikershandleiding / User Manual / Bedienungsanleitung
4 green LEDs,
the battery is fully
charged
2 green LEDs,
the battery is 50%
charged
No illuminated LEDs
The battery is
insufficiently
charged. Charge the
battery pack with the
battery charger.
3 green LEDs,
the battery is more
than 50% charged
1 green led,
the battery is almost
completely
discharged. Charge
the battery pack
with the battery
charger.
HAL200Li, rev. 1.0: 09-02-20223