Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation Guide for 3020-PRO MAX
STEP 2: Install the Laser Head
1. Insert the laser module holder into the spindle holder.
2. Align the four corners of the laser module with the square slots, and then push the laser head into the spindle
holder.
3. Tighten the M5 screws when the top of the heat sink is aligned with the top of the spindle holder.
push
Laser Module Holder
M5 Screw
Spindle Holder
13
Werbung
Inhaltsverzeichnis
