Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation Guide for 3018-PRO & 3018-PROVer
STEP 4: Cable Connection
1. 3018-PROVer: Plug one end of the 2-pin connector into the PWM port of the machine controller and the other
end into the PWM port of the laser module controller; Plug the 12V power cable into the 12V DC power jack.
2. 3018-PRO: Plug one end of the 2-pin connector into the 12V PWM GND port of the machine controller and
the other end with the 12V power and PWM port.
PWM
2-pin Connector
PWM Control
12V DC Power
12V PWM GND
12V Power and PWM Port
12V
PWM GND
11
Werbung
Inhaltsverzeichnis
