Bosch 1 609 92A 4XS AS Originalbetriebsanleitung Seite 14

► If operating a power tool in a damp location is
un avoidable, use a residual current device
(RCD) protec ted supply. Use of an RCD
reduces the risk of electric shock.
Personal safety
Stay alert, watch what you are doing and use
►
common sense when operating a power tool.
Do not use a power tool while you are tired
or under the influence of drugs, alcohol or
medication. A moment of inatten tion while
operating power tools may result in serious per
sonal injury.
Use personal protective equipment. Always
►
wear eye protection. Protective equipment
such as a dust mask, non-skid safety shoes,
hard hat or hearing protection used for
appropriate conditions will reduce personal in
juries.
► Prevent unintentional starting. Ensure the
switch is in the off-position before
connecting to power source and/or battery
pack, picking up or carrying the tool.
Carrying power tools with your finger on the
switch or en ergising power tools that have the
switch on invites acci dents.
Remove any adjusting key or wrench before
►
turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool
may result in personal in jury.
Do not overreach. Keep proper footing and
►
balance at all times. This enables better
control of the power tool in unexpected
situations.
Dress properly. Do not wear loose clothing or
►
jew ellery. Keep your hair and clothing away
from moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
If devices are provided for the connection of
►
dust ex traction and collection facilities,
ensure these are con nected and properly
used. Use of dust collection can re duce
dust-related hazards.
► Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action
can cause severe in jury within a fraction of a
second.
Power tool use and care
► Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was de signed.
Do not use the power tool if the switch does
►
not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.
Disconnect the plug from the power source
►
and/or re move the battery pack, if
detachable, from the power tool before
making any adjustments, changing ac
cessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
► Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are
dangerous in the hands of untrained users.
Maintain power tools and accessories.
►
Check for mis alignment or binding of
moving parts, breakage of parts and any
other condition that may affect the power
tool's operation. If damaged, have the power
tool repaired before use. Many accidents are
caused by poorly maintained power tools.
Keep cutting tools sharp and clean.
►
Properly main tained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
► Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into ac count the working conditions
and the work to be per formed. Use of the power
tool for operations different from those intended
could result in a hazardous situation.
Keep handles and grasping surfaces dry,
►
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for
safe handling and control of the tool in
unexpected situations.
Battery tool use and care
Recharge only with the charger specified by
►
the manu facturer. A charger that is suitable for
one type of bat tery pack may create a risk of fire
when used with another battery pack.
Use power tools only with specifically
►
designated bat tery packs. Use of any other
battery packs may create a risk of injury and
fire.
When battery pack is not in use, keep it
►
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
Under abusive conditions, liquid may be
►
ejected from the battery; avoid contact. If
contact accidentally oc curs, flush with
water. If liquid contacts eyes, addi tionally
seek medical help. Liquid ejected from the bat
tery may cause irritation or burns.
Do not use a battery pack or tool that is
►
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
► Do not expose a battery pack or tool to fire
English | 11