Measuring; Taking Measurements; Annotating Photos - TOOLCRAFT Digimicro LAB 3.0 Softwareanleitung

6 Measuring

6.1 Taking measurements

1. Press the photo button
--OR--
Open a photo from the pool.
2. Double-click the photo to open the measuring interface.
3. Click the measuring tool
4. Click the points between which you want to measure the distance.
The measured distance is displayed.
Æ

6.2 Annotating photos

You can annotate photos with the drawing or type tool. You can configure both tools
to your desired needs.
1. Press the photo button
--OR--
Open a photo from the pool.
2. Select the drawing
3. Make annotations.
4. Click the save button
16
to take a photo.
and select a shape.
to take a photo.
or type tool
to save the annotated photo.
.