HH Electronics TESSEN TNi-W-PRO Bedienungsanleitung Seite 10

TNi PRO INSTALLATION LOUDSPEAKERS
SPECIFICATIONS - TNi-W8PRO
System type
Woofer Size
Tweeter Size
Nominal System Impedance
Power Rating
Recommended Amplifier
Sensitivity 1W/1m
Maximum SPL (1m)
Frequency response
Input / Link Connector
Horizontal Dispersion Angle
Vertical Dispersion Angle
Crossover Frequency
Enclosure
Main Construction Material
Finish
Grille
Mounting Bracket
Mounting Suspension Points
Unit dimensions (HWD)
Unit weight
Carton dimensions (HWD)
Packed weight
EAN Code
In the interest of continued development, HH reserves the right to amend product specification without prior notification.
1 AES standard Pink Noise 12dB crest factor 2 hours
2 Measured in Full space (4π) conditions
3 Calculated maximum SPL based on rated power handling
SYSTEM RESPONSE
© 2022 HH Electronics Ltd
8" 2 way Passive Speaker, Bass Reflex
8" HH Designed High Performance Driver, 2.0" Voice Coil
1.0" Celestion CDX1-1070
8 ohm
1 200W AES, 400W Continuous, 800W Peak
400-800W @ 8 Ohms
2 96 dB SPL
3
119 dB SPL, 125 dB SPL (Peak)
52 - 20kHz (-10dB)
63 - 18kHz (-3dB)
Euro Block Connector and M4 Barrier Strip Terminal (7.62mm Pitch)
90°
60°
2.2KHz
Robust all wood construction (15mm plywood)
Hard wearing spatter finish (White or Black option)
Powdercoated steel with acoustic foam backing
4x M8 mounting points for optional HH-BRK30
7x M10 Penn-Elcom fly points (3 on top face, 2 on side face, 1 on rear, 1 on bottom)
474 x 270 x 257mm, 18.7" x 10.6" x 10.1"
9.6Kg, 21.2 lbs
605 x 370 x 365mm, 23.8" x 14.6" x 14.4" , 0.082 M3
11.9Kg, 26.2 lbs
5060109457728 (Black), 5060109457735 (White)
Designed and Engineered in the UK by HH Electronics LTD.
EN
iNSTALL
INSTALLATION
10