Herunterladen Inhalt Inhalt Diese Seite drucken

Werbung

iNSTALL
WALL MOUNTED LOUDSPEAKERS
USER MANUAL
TNi-W8
TNi-W6
TNi-W4
Designed and Engineered in the UK by HH Electronics LTD.

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für HH Electronics TNi-W4

  • Seite 1 WALL MOUNTED LOUDSPEAKERS USER MANUAL TNi-W8 TNi-W6 TNi-W4 Designed and Engineered in the UK by HH Electronics LTD.
  • Seite 2: Installation

    WALL MOUNT LOUDSPEAKER INTRODUCTION The Tessen wall mount installation speaker range includes 3 models: TNi-W4 (4 inch), TNi-W6 (6.5 inch) and TNi-W8 (8 inch) providing premium audio reproduction with effortless installation. Each of the TNi-W speakers feature adjustable power settings, and the ability to connect to 70V/100V or 8 Ohm lines.
  • Seite 3 5: Re-assemble the two halves of the bracket using the M8 bolt and associated hardware. (14MM SPANNER) M8 BOLT M8 WASHER M8 WASHER M8 LOCKNUT (13MM SPANNER) TO CABINET TO WALL TO WALL TO CABINET © 2020 HH Electronics Ltd Designed and Engineered in the UK by HH Electronics LTD.
  • Seite 4 To set the loudspeaker tilt, loosen the two nuts indicated bottom of the bracket. Set the required rotation and below. Set the desired tilt and re-tighten both nuts. re-tighten the nut afterwards. © 2020 HH Electronics Ltd Designed and Engineered in the UK by HH Electronics LTD.
  • Seite 5: Horizontal Mounting

    To set the loudspeaker rotation, loosen the two nuts indicated below. Set the desired rotation and re-tighten both nuts. TILT To set the loudspeaker Tilt, loosen the nut indicated below. Set the desired rotation and re-tighten the nut. © 2020 HH Electronics Ltd Designed and Engineered in the UK by HH Electronics LTD.
  • Seite 6 MADE IN CHINA MADE IN CHINA DESIGNED AND ENGINEERED DESIGNED AND ENGINEERED IN THE UK BY IN THE UK BY WWW.HHELECTRONICS.COM WWW.HHELECTRONICS.COM INTERNAL CONNECTIONS LINK INPUT © 2020 HH Electronics Ltd Designed and Engineered in the UK by HH Electronics LTD.
  • Seite 7 As with the 70V line system, five options are available for the 100V line system. Positions 1 to 4 offer variable output levels and the 5th will disable the speaker output. TNi-W4 TNi-W6 and TNi-W8 2.5W 2.5W 100V 100V IMPEDANCE 8Ω IMPEDANCE 8Ω © 2020 HH Electronics Ltd Designed and Engineered in the UK by HH Electronics LTD.
  • Seite 8 1 1 1 2 2 2 2.5W 3 3 3 100V 4 4 4 5 5 5 6 6 6 IMPEDANCE 8Ω To additional Cabinet. © 2020 HH Electronics Ltd Designed and Engineered in the UK by HH Electronics LTD.
  • Seite 9 IN THE UK BY WWW.HHELECTRONICS.COM WWW.HHELECTRONICS.COM REMEMBER: An amplifier can drive into an impedance higher than its output impedance, but one with a lower impedance could cause problems. © 2020 HH Electronics Ltd Designed and Engineered in the UK by HH Electronics LTD.
  • Seite 10 1 - Measured in Full space (4π) conditions 2 - Calculated maximum SPL based on rated power handling 3 - AES standard, pink noise with 6 dB crest factor, free air. © 2020 HH Electronics Ltd Designed and Engineered in the UK by HH Electronics LTD.
  • Seite 11   SATELLITE WALL SPEAKER TNi-W4 71.5 (Dimensions in mm) © 2020 HH Electronics Ltd Designed and Engineered in the UK by HH Electronics LTD.
  • Seite 12 1 - Measured in Full space (4π) conditions 2 - Calculated maximum SPL based on rated power handling 3 - AES standard, pink noise with 6 dB crest factor, free air. © 2020 HH Electronics Ltd Designed and Engineered in the UK by HH Electronics LTD.
  • Seite 13   SATELLITE WALL SPEAKER TNi-W6 98.0 (Dimensions in mm) © 2020 HH Electronics Ltd Designed and Engineered in the UK by HH Electronics LTD.
  • Seite 14 1 - Measured in Full space (4π) conditions 2 - Calculated maximum SPL based on rated power handling 3 - AES standard, pink noise with 6 dB crest factor, free air. © 2020 HH Electronics Ltd Designed and Engineered in the UK by HH Electronics LTD.
  • Seite 15   SATELLITE WALL SPEAKER TNi-W8 (Dimensions in mm) © 2020 HH Electronics Ltd Designed and Engineered in the UK by HH Electronics LTD.
  • Seite 16: Specification

    WALL DRILL TEMPLATE IMPORTANT: The TEMPLATE needs to be printed at a 1:1 scale. Page size: A4. Check template dimensions before proceeding with the installation. © 2020 HH Electronics Ltd Designed and Engineered in the UK by HH Electronics LTD.
  • Seite 17: Safety Information

      SATELLITE WALL SPEAKER SAFETY INFORMATION © 2020 HH Electronics Ltd Designed and Engineered in the UK by HH Electronics LTD.
  • Seite 18: General Instructions

    To prevent electrical shock or fire hazard, do not expose this appliance to rain or moisture. Before using this appliance please read the operating instructions. WARNING: © 2020 HH Electronics Ltd Designed and Engineered in the UK by HH Electronics LTD.
  • Seite 19: Wichtige Sicherheitshiisenwe

    Gefahr eines elektrischen Schlags - NICHT ÖFFNEN. Um die Gefahr eines elektrischen Schlags zu vermeiden, darf die Abdeckung nicht geöffnet werden. Überlassen Sie die Wartung qualifiziertem Fachpersonal. WARNING: © 2020 HH Electronics Ltd Designed and Engineered in the UK by HH Electronics LTD.
  • Seite 20: Instrucciones Importantes De Seguridad

    NÃO operar o amplificador em uma escrivaninha, mesa, prateleira WARNING: ou de alguma forma inadequada plataforma nonstable. © 2020 HH Electronics Ltd Designed and Engineered in the UK by HH Electronics LTD.
  • Seite 21: Importanti Istruzioni Di Sicurezza

    Se il vostro apparecchio è dotato di un meccanismo di inclinazione o di un mobile in stile contraccolpo, si prega di utilizzare questa caratteristica di design con cautela. A causa della facilità WARNING: © 2020 HH Electronics Ltd Designed and Engineered in the UK by HH Electronics LTD.
  • Seite 22 黄绿色电缆须连接至标有字母“E”的电极,为接地符号。颜色为黄绿色或绿色。 b) 蓝色电缆须连接至标有字母“N”的电极,颜色为蓝色或黑色。 c) 棕色电缆须连接至标有字母“L”的电极,颜色为棕色或红色。 18. 该电器不能放置于有水滴或有水溅出的地方,须注意,不要将盛有液体的容器,如花瓶放在该电器上。 19.如果人处于极高噪音级中可能会造成永久失聪。每个人受噪音导致听力损害的差异很大。然而若长时间处于极强噪音中,任何人几乎 都会造成不同程度的听力损害。美国政府职业安全健康管理局(OSHA)指定了以下允许范围内的噪音级别,见右表:根据OSHA,任 何超出上述允许的极限范围可导致不同程度的听力损害。在运行该电器时,人体处于超出了以上设定的限制,须佩戴耳塞或配备耳朵 的保护装置,以预防永久性听力损害。为避免可能处于强声压程度的危险,该电器运行时,建议处于强声压程度下的所有人均配备听 力保护装置。 20. 用于产品和说明书上的符号和术语是为了提醒操作人员注意需要额外注意的地方,具体如下: 旨在提醒使用者小心产品空箱内的未绝缘“危险电压”,这可能足以对人构成触电危险。 旨在提醒使用者与产品一起提供的说明书中的重要操作和维护(保修)说明。小心触电-不能打开 为了降低触电风险,请不要打开盖子。里面不含任何用户可用的配件。请将维修交于被许可的人员。 为避免触电或火灾,请不要将本产品置于雨中或潮湿环境中。在使用本产品前,请仔细阅读操作说明。 该产品仅 用于 2000m 地 全使用 该产品仅适用于非热带气候条件下安全使用 2000m © 2020 HH Electronics Ltd Designed and Engineered in the UK by HH Electronics LTD.
  • Seite 23 電源コードは、踏まれたりはさまれたりしないように注意してください。 メーカーによって供給されたパーツ以外は使用しないでください。 キャスター等は、付属品を使用してください。転倒等の事故がないように十分注意してください。 長時間使用しない時、また雷雨の時などはコンセントを抜いてください。 電源コードやプラグの破損、強い衝撃や、液濡れ等の理由で正常に装置が動作しない場合は、 ご購入店にご相談ください。 激しい騒音環境下では、永続的な難聴を引き起こす可能性があります。 騒音性 難聴への影響度には個人差がありますが、 激しい騒音の中にある一定の期間さらされた場合、 ほとんどの人の聴覚に悪影響を及ぼす可能性があります。米国政府の 労働安全衛生局(OSHA)は、ノイズレベルの許容量(条件) を定めています: OSHAによると、許容量を超える騒音は、 少なからず難聴に繋がる可能性があります。 このアンプシステムを操作する際、 万が一制限値を超えている場合は、永続的な 難聴を防ぐためにも耳栓などを使用してください。 機材またはマニュアルに記載された記号、及び名称は、ご使用時に注意が必要なものとなります。 下記をご参照ください。 機材内部には、人に感電する危険性のある“高電圧”が流れている場合があります。 付属の冊子に書かれている操作上、または管理上(サービス上)重要な事項を確認してください。 製品カバーを開けないでください。感電の危険性を減らすためにも、蓋は取り外さないでください。 内部にはユーザーが修理できる部品はありません。資格ある技術者の指示を仰いでください。 感電や火災の危険を防止するため、この装置を雨や湿気にさらさないでください。使用する前には、 必ず取扱説明書をお読みください。 © 2020 HH Electronics Ltd Designed and Engineered in the UK by HH Electronics LTD.
  • Seite 24 hhelectronics hhelectronics Model number: hhelectronics Serial number: Place of purchase: Date of purchase: www.hhelectronics.com REVISION 2.00...

Diese Anleitung auch für:

Tni-w6Tni-w8

Inhaltsverzeichnis