System; Status - Devolo MAGIC 1 LAN1-1 Handbuch

IPv4 Configuration
In the factory default settings, only the DHCP
enabled option for IPv4 is enabled. This means
that the IPv4 address is retrieved axiomatically
from a DHCP server. The currently assigned net-
work data is visible (greyed out).
If a DHCP server is already present on the network
for giving out IP addresses (e.g. your Internet rou-
ter), you should enable the DHCP enabled option
so that the devolo Magic 1 LAN automatically
receives an address from it.
If you want to assign a static IP address, make
entries accordingly for the Address, Subnetmask,
Default gateway and Name server fields.
Confirm your settings by clicking the Disk icon.
Then, restart the devolo Magic adapter to ensure
that your changes take effect.
IPv6 Configuration
Address: Display indicating the global IPv6 address
in use to access the internet.
Präfix: Display indicating the prefix length in bit. A
prefix is the first bit of the IPv6 address. Example:
2a00:fe0:313:25:f606:8dff:fe4f:6aee with prefix
64 means that the prefix here is 2a00:fe0:313:25.

4.5 System

In the System area, you can configure the settings
for security and other devolo Magic adapter device
functions.

4.5.1 Status

Here you can view the most important information
on the devolo Magic adapter, including the current
date and time, time zone and MAC address of the
adapter.
Configuration 30
1-1
devolo Magic 1 LAN