Connecting The Devolo Magic 1 Lan; Starter Kit - Automatic Set-Up For A New Devolo Magic Network - Devolo MAGIC 1 LAN1-1 Handbuch

19 Initial use
3.4 Connecting the
devolo Magic 1 LAN
In the following sections we describe how to
connect the devolo Magic 1 LAN and integrate it
into a network. We clarify the exact procedures ba-
sed on potential network scenarios.
3.4.1Starter Kit – Automatic set-up for a
new devolo Magic network
1
Connect one devolo Magic 1 LAN to your Inter-
net access device's network connection (e.g.
your Internet router).
2
Connect the other devolo Magic 1 LAN to the
network connection of your computer or ano-
ther network device using a network cable.
CAUTION! Tripping hazard
Lay the cable in a barrier-free manner and
ensure that the electrical socket and the
connected network devices are easily ac-
cessible
3
Plug both devolo Magic adapters into available
power sockets within 3 minutes. As soon as the
LEDs on both adapters flash white at regular
intervals of 0.5 sec., they are ready to operate
and automatically start the process of establis-
1-1
devolo Magic 1 LAN
hing an encrypted connection to each other
(see Chapter 2.3.1 Reading the indicator
light).
If the LEDs on both devolo Magic adapters
light up in white,
devolo Magic network has been set up ac-
cording to your individual specifications
and is protected from unauthorised access.
then your