2Addition - Expanding An Existing Network By Adding Another Devolo Magic Adapter; Changing The Network Password - Devolo MAGIC 1 LAN1-1 Handbuch

3.4.2Addition – Expanding an existing
network by adding another
devolo Magic adapter
Before you can use the devolo Magic 1 LAN in your
devolo Magic network, first you have to connect it
to your existing devolo Magic adapters as a
network. This is accomplished by using a shared
password.
CAUTION! Tripping hazard
Lay the cable in a barrier-free manner and
ensure that the electrical socket and the
connected network devices are easily
accessible
1
Connect the devolo Magic 1 LAN to the net-
work connection of your computer or another
network device using a network cable.
2
Plug the devolo Magic 1 LAN into an available
power socket. As soon as the LED flashes white
at regular intervals of 0.5 seconds, the adapter
is ready to operate but not yet integrated into
a devolo Magic network (see Chapter 2.3.1
Reading the indicator light).
3
Within 3 minutes, press the PLC/reset button
on a devolo Magic adapter in your existing
devolo Magic network for approximately 1 sec.
The new devolo Magic adapter pairs auto-
matically so no button needs to be pressed.
The LED of this adapter now also flashes
white.
If the LEDs light up white on both
devolo Magic adapters, the new adapter
has been successfully integrated into your
existing devolo Magic network.
For each pairing operation, only one addi-
tional adapter can be added at a time.

3.4.3 Changing the network password

A network password can also be changed in the
following ways:
b
Using the web interface of the devolo Magic
adapter (see Chapter 4.3 Powerline)
or
b
Using devolo Cockpit
devolo Home Network App. For more infor-
mation, refer to the following chapter.
Initial use 20
or the
1-1
devolo Magic 1 LAN