Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
STEP 2B Attach Wall Plate
CAUTION:
Avoid potential personal injury or property damage!
●
Mount wall plate
directly onto concrete surface (no wall covering)
08
●
Minimum solid concrete thickness: 8 in. (203 mm)
●
Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
●
Minimum spacing between lag bolts is 16 in.
●
For concrete applications, arm assembly
Keep this in mind when selecting wall plate location
1
07
3
C1
CAUTION:
Be sure the anchors C1 are seated flush with the
concrete surface.
Concrete achors (Fischer UX10 x 60R) C1 available through Customer Service.
Solid Concrete or Concrete Block Installation
(STEP 3) must remain centered in wall plate
11
.
08
2
3 in. (8 cm)
3/8 in.
(10 mm)
CAUTION:
Never drill into the mortar between blocks.
4
09
08
002862.eps
CAUTION:
Avoid potential personal injury or property damage!
Improper use could reduce the holding power of the lag bolt
Tighten the lag bolts
and lag washers
09
pulled FIRMLY against the wall plate
DO NOT over-tighten the lag bolts
Concrete Anchors are not included
Contact Customer Service:
US: 1-800-359-5520
EMEA: +31 (0) 495 580 852
UK: +44 (0) 800 056 285
to inquire about the concrete anchors.
10
09
.
10
only until they are
.
08
.
09
07
7
Werbung
Inhaltsverzeichnis
