Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
STEP 2A Attach Wall Plate
CAUTION:
Avoid potential personal injury or property damage!
●
Drywall covering the wall must not exceed 5/8 in. (16 mm)
●
Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1½ x 3½ in. (38 x 89 mm)
●
Minimum spacing between studs: 16 in. (406mm)
●
Stud center must be verified
1
Max.
5/8 in. (16 mm)
(406 mm)
3
07
IMPORTANT: Be sure to drill into the center of the stud.
IMPORTANT: Pilot holes must be drilled to a depth of 2 3/4 in. (7 cm), using a 7/32
in. (5.5 mm) diameter drill bit.
6
Min.
16 in.
2 3/4 in. (7 cm)
7/32 in.
(5.5 mm)
Wood Stud Installation
2
4
09
08
CAUTION:
Avoid potential personal injury or property damage!
Improper use could reduce the holding power of the lag bolt
Tighten the lag bolts
09
pulled FIRMLY against the wall plate
DO NOT over-tighten the lag bolts
10
and lag washers
10
only until they are
.
08
. Go to STEP 3 on PAGE 8.
09
07
09
.
Werbung
Inhaltsverzeichnis
