On/Off Switch - Hitachi CV-975FC Bedienungsanleitung

How to operate
1 INSERT THE MAINS PLUG INTO A SOCKET AS
ILLUSTRATED 9
• The cleaner should be unplugged from
the mains when not in use.
2

ON/OFF SWITCH

Motor is switched ON/OFF by changing the
power switch bk.
3 RUG AND FLOOR TOOL
The tool is fitted with a brush at the back which can
either be used in the "withdrawn" or "projected" position.
These positions are operated by the pedal on the tool
marked "
For cleaning rug or carpet, keep the brush in its
"withdrawn" position, i.e., with the pedal marked "
pressed down with your toe.
If you feel the tool is too heavy to slide on the floor
and carpet, please reduce the suction power by
adjusting the suction control (Page 5).
4 SUCTION CONTROL
Suction pressure can be reduced by moving the
adjustment ring bn on the curved joint pipe 1 to expose
a hole. The more the hole area is exposed, the lower
the suction is. Low suction pressure is recommended
for cleaning curtains, blinds, delicate fabrics, etc.
5 HOW TO ADJUST TELESCOPIC PIPE
Hold the handle and grasp bo the telescopic pipe with
another hand, move it up and down to adjust the length.
• Do not touch this area, while adjust the
length of telescopic pipe.
6
CAUTION
" (Carpet) bl and "
CAUTION
bk
" (Floor) bm .
9
"
1
bn
bo
bl
bm