Technical Data; Materials In Contact With Media - Sika VVX-Serie Betriebsanleitung

Technical Data

7 Technical Data
The technical data of customised versions may differ from the data in this operating manual.
Please observe the information specified on the type plate.
7.1 Characteristics VVX
Type
Electrical characteristics
Supply voltage
• Standard
• Voltage / Current output
0...10 V / 4...20 mA
Current consumption
• Frequency / Analogue
output
Electrical connection
Degree of protection
(EN 60529)
Connecting cable
(Accessory)
Process variables
Medium to measure
Temperature range:
- Medium
- Ambient
Nominal diameter
Inner diameter
Nominal pressure
Process connection
*1) Only with attached coupling

7.2 Materials in Contact With Media

Type
Component
Tube
Sensor
O-rings
Immersion sleeve
Bluff body
- 28 -
VVX15 VVX20
DN 15
Ø 13 mm Ø 19 mm
G ¾ ISO 228 G1 - ISO 228
male
Quick-Fasten
VVX15 • VVX20 • VVX25
PPS
40 % glass fibre reinforced
-/-
-/-
VVX25
8...30 V or 5 V
DC
12...24 V
< 15 mA
5-pin-plug M12x1 or 4-pin plug M12x1
*1
IP65 and IP67
Female connector M12x1 with cable
Water and aqueous solutions
-20...90 °C (non-freezing)
-20...70 °C
DN 20 DN 25
Ø 25 mm
PN 10
G 1¼ ISO
male • 228 male
Brass CW617N-DW
ETFE or PFA
EPDM
Brass CW724R
VVX32
±5%
DC
DC
*1
DN 32
Ø 32 mm
PN 16
G 1½-ISO G 2-ISO 228
228 male
VVX32 • VVX40
Stainless steel
1.4581
Stainless steel
1.4571
PPS
40 % glass fibre reinforced
© SIKA • Ba_VVX • 01/2023
VVX
VVX40
DN 40
Ø 40 mm
male