Specifications; Sander Safety Warnings; Functional Description - Makita BO4555 Betriebsanleitung

ENGLISH
1. Switch
2. Punch plate
3. Sandpaper
4. Guide
5. Velcro sandpaper

SPECIFICATIONS

Model
Pad size
Orbits per minute (min
Dimensions (L x W x H)
Net weight
Safety class
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for the sanding of large surface of
wood, plastic and metal materials as well as painted
surfaces.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.

SANDER SAFETY WARNINGS

1. Always use safety glasses or goggles. Ordinary
eye or sun glasses are NOT safety glasses.
2. Hold the tool firmly.
3. Do not leave the tool running. Operate the tool
only when hand-held.
4. This tool has not been waterproofed, so do not
use water on the workpiece surface.
5. Ventilate your work area adequately when you
perform sanding operations.
6. Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation and
skin contact. Follow material supplier safety data.
7. Use of this tool to sand some products, paints and
wood could expose user to dust containing
hazardous substances. Use appropriate
respiratory protection.
8. Be sure that there are no cracks or breakage on
the pad before use. Cracks or breakage may cause
a personal injury.
SAVE THESE INSTRUCTIONS.
4
Explanation of general view
6. Base
7. Dust bag
8. Groove
9. Front fixing cardboard
10. Front side of paper dust bag
BO4555
-1
)
131 mm x 112 mm x
142 mm
BO4556
112 mm x 102 mm
14,000
131 mm x 112 mm x 141 or 143 mm
1.1 kg
WARNING:
ENE052-1
DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to safety
rules for the subject product. MISUSE or failure to
follow the safety rules stated in this instruction
ENF002-1
manual may cause serious personal injury.

FUNCTIONAL DESCRIPTION

CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Switch action (Fig. 1)
GEB021-4
CAUTION:
• Before plugging in the tool, always check to see that
the tool is switched off.
To start the tool, press the " I " side of the switch. To stop
the tool, press the "O"side of the switch.
ASSEMBLY
CAUTION:
• Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
Installing or removing abrasive paper
(Fig. 2)
Open the paper clamp by raising on the lever to release
from the locking port and then Insert the paper end into
the clamping part, aligning the paper edges even and
parallel with the sides of the base. (Bending the paper
beforehand makes attachment easier). Once the paper is
in place, return the lever to its original position. (Fig. 3)
Repeat the same process for the other end of the base,
maintaining the proper paper tension.
11. Claws
12. Upper part
13. Notch
BO4558
1.2 kg
/II
BO4557
131 mm x 112 mm x
137 mm
1.0 kg