Installation Of The Appliance - Veripart VPIBKK122 Benutzerinformation

6. Heat dissipation area
During operation, the appliance emits heat to the environment. Therefore
there must be at least 2 centimetres clearance on the top, at least 2
centimetres on both sides and at least 2 centimetres on the back of the
fridge. (see also page 39).
7.

Installation of the appliance

• This appliance is intended for use as a built-in refrigerator.
• Before plugging in the power cable, check that the voltage and
frequency of the type plate match your power supply network. The
appliance must be earthed. The power cable is supplied with a contact
for this purpose. If the socket is not earthed, connect the appliance to a
separate earth according to current regulations and consult a quali ed
electrician.
8. Mounting accessories
- Adjustable shelves
The walls of the appliance are equipped with a series of guide pro les
so that the shelves can be inserted if desired.
- Installing the door compartments
To store food of different sizes, the door compartments can be set to
different heights. Proceed as follows: gradually pull the compartment in
the direction of the arrows until it comes loose and put it in the desired
position.
42