9.10 Removing A Connected Network - VOSS.farming Fence Manager FM20 WiFi Bedienungsanleitung

INSTRUCTION MANUAL VOSS.FARMING FENCE MANAGER FM20 WIFI
In fo
You can also access the page by entering the IP address 192.168.4.1
in any web browser or scan the QR code here:
A list of available WiFi networks will be shown.
7. Select your WiFi network and enter the correct password.
If the password is entered correctly, the device connects to your network and the second QR code
closes after approx. 30 seconds.
Your network is then shown in the
shows
WS Ready
Info
You need to repeat the process if a connection has not been
established after approx. 30 seconds. Select the
WiFi Config
confirm the selection by briefly pressing the Enter button.
A window is shown with the message
. A new connection can be established after
stopped
approx. 15 seconds.
The Fence Manager FM20 WiFi can now be saved to the cloud
application (website/app) (see Section 9.11).

9.10 REMOVING A CONNECTED NETWORK

The line behind
SSID
to a new network. If a connected network is shown in this line, it must be deleted.
1. Press and hold the Menu button in the overview window or the detail window for more than one
second to open the menu.
2. Select the
WiFi Setup
item using the arrow buttons and
confirm the selection by briefly
pressing the Enter button.
3. Use the arrow keys to select the
menu item, then
Reset SSID
use the arrow keys to select
and confirm the selection by
briefly pressing the Enter button
(Fig. 17 and Fig. 18).
The screen refreshes after approx.
10–15 seconds.
Reset
switches to
Configure WiFi
and the line behind
SSID
(Fig. 19).
You can now connect the device with a new network (see Section
9.9).
41660 - 11.2022 - V2
line, and the second line
SSID
(Fig. 16).
menu item using the arrow buttons and
must be empty to connect the VOSS.farming Fence Manager FM 20 WiFi
menu
YES
SSID
is empty
Stop
Config mode
Fig. 17
Fig. 16
Fig. 18
Fig. 19
47
DE
EN
FR
IT
NL
SV
ES