Associating Fence Sensors - VOSS.farming Fence Manager FM20 WiFi Bedienungsanleitung

2. Select the
Pairing
pressing the Enter button.
3. Switch the Fence Sensor to pairing mode.
• To do so, switch off the Fence Sensor with the magnet.
• Hold the magnet against the Fence Sensor until the LED
on the Fence Sensor alternately flashes green and red.
4. Place the Fence Sensor in close proximity to the Fence Manager.
5. Select an empty line (
using the arrow buttons (Fig. 5).
6. Briefly press the Enter button to confirm the selection.
The Fence Sensor will be paired with the Fence Manager and the
display shows
Pairing new device
Following successful pairing, a
window appears in which a letter
can be assigned to the Fence
Sensor and, if desired, the Fence
Sensor can be assigned to an
energiser (Fig. 7).
I nfo
The house icon signifies
that the device has not
been associated to an
energiser. For information
on associating devices, see
Section 9.3.
7. Briefly press the Enter button
and use the arrow buttons to
assign a number.
8. Confirm your input by briefly pressing the Enter button.
The Fence Sensor is now paired with the Fence Manager and
displayed in the list (Fig. 8).
9. Press the Exit button to return to the previous menu.
9.3

ASSOCIATING FENCE SENSORS

If you use one or more Fence Sensors on an electric fence that is operated by an energiser, it
is advisable to associate these Fence Sensors to the energiser. This makes it easier to tell the
devices apart. It also prevents the Fence Sensors from triggering an alarm if the energiser is
deliberately switched off.
1. Press and hold the Menu button in the overview window or the detail window for more than one
second to open the menu.
2. Select the
Pairing
pressing the Enter button.
3. Use the arrow buttons to select one of the Fence Sensors from the list.
4. Confirm the selection of the Fence Sensor by briefly pressing the Enter button.
42
INSTRUCTION MANUAL VOSS.FARMING FENCE MANAGER FM20 WIFI
menu item using the arrow buttons and confirm the selection by briefly
----- empty -----
menu item using the arrow buttons and confirm the selection by briefly
) in the list
(Fig. 6).
Fig. 6
Fig. 5
Fig. 7
Fig. 8
41660 - 11.2022 - V2