How It Works; Buttons And Functions - VOSS.farming Fence Manager FM20 WiFi Bedienungsanleitung

6.2

HOW IT WORKS

The VOSS.farming Fence Manager FM20 WiFi receives data from RF energisers and/or VOSS.
farming Fence Sensors via the radio frequency and shows the data on the display. You can pair
up to six independent devices to the Fence Manager within the transmission range and use the
Fence Manager or cloud application (website/app) to monitor and operate the devices.
This device can be used to determine information about the function of all connected devices.
Users can access all essential information concerning the fence. They can also set an alarm that
informs them if one of the values drops below the set limits.
When using RF energisers, you can switch the energisers on or off, change the power levels (5 J
limit/100%) and set alarms.
If a Fence Sensor is used, the Fence Manager receives information about the voltage applied to
the fence. The Fence Manager can be used to set an alarm that sounds as soon as the voltage
drops below the value.
6.3

BUTTONS AND FUNCTIONS

The Fence Manager uses two types of button press:
∙
Short press (less than one second)
∙
Long press (more than one second)
Icon Description
Arrow buttons
Enter button
Information
button
34
INSTRUCTION MANUAL VOSS.FARMING FENCE MANAGER FM20 WIFI
Screen
Detail window
Overview window
Menu and settings
Detail window
Overview window
Menu and settings
Detail window
Overview window
Function
∙
Device selection
∙
Parameter adjustments
∙
Menu navigation
Short press
• Switch the energiser on/off
Long press
• Change the power of the
energiser (50%/100%)
I n fo
These functions are not available for
the Fence Sensor.
Short press
• Confirm entry
• Switch to the next display
Long press
• Delete device from the list of
paired devices
Short press
• Query the current status of the
selected device
• Confirm or delete an alarm
Long press
• Set an alarm threshold
41660 - 11.2022 - V2