Clean Air Optima A-705 Smart Gebrauchsanweisung Seite 9

Note:
• If your default network has changed, reset the WiFi connection, follow step 1 to 9 in the
'Set up WiFi connection' section.
• If you want to pair multiple devices to your smartphone or tablet, you have to do this one
after the other.
• Make sure that the distance between your smartphone or tablet and the device is less than
5 meters and there are no obstacles. Also make sure you are in the same room as the
device.
Reset the WiFi function:
- The device must be switched off.
- Reset the WiFi by pressing the 'Mode' button for 5 seconds, the indicator light of the WiFi will
blink rapidly.
Turn off WiFi function:
- The device must be switched off.
- Reset the WiFi by pressing the 'Mode' button for 5 seconds, the indicator light of the WiFi will
blink rapidly.
- Turn of the WiFi by pressing the 'Mode' button for another 5 seconds, the indicator light of the
WiFi will go out.
Room temperature increases during operation
The Clean Air Optima® dehumidifier doesn't have a cooling function. The device will produce
heat during operation and increase the room temperature between 1 °C to 4 °C.
Dehumidifying capacity
The illustration below shows the dehumidifying capacity of the Clean Air Optima® dehumidifier.
By different temperatures and relative humidity, the dehumidifier may have different
dehumidifying capacities.
Dehumidifying capacity
Humidity 80%
Room temperature
9