Clean Air Optima A-705 Smart Gebrauchsanweisung Seite 6

Control panel / Operation instruction
Power
Press the Power Button to activate the device.
Press the Power Button again, the device turns off.
MODE
Press the MODE Button to select one of four desired programs:
1. Normal dehumidification (adjustable fan speed and humidity setting)
Icon with name in App: Normal
2. Continuous dehumidification (low fan speed, humidity setting not adjustable)
Icon with name in App: Continuous
3. Strong dehumidification (high fan speed, fan speed and humidity setting not adjustable)
Icon with name in App: Strong
4. Dry clothes mode (high fan speed, fan speed and humidity setting not adjustable)
Icon with name in App: Dry clothes
Humidity setting
By pressing the Humidity Button, you can select the desired humidity level by
pressing this button repeatedly until the required humidity level is displayed
(from 30% to 80% in increments of 5%).
Once you select your desired humidity level, simply stop pressing the button and
your humidity level will be set. When the humidity level in the room reaches the set
humidity level, the device will go into automatic sleep state and stops dehumidifying
and air purifying. When the room's actual humidity level increases again above your
set humidity level, then the device will start dehumidifying and air purifying again.
If the desired humidity level is reached at a constant level, you can switch with the air
purification button for continuous air purification.
6
(Only for MODE program: Normal dehumidification)