IPSPRO IPS-110 pro Installations- Und Benutzerhandbuch Seite 44

1.Power On: Press
2.Adjust Set Temperature: When screen is unlocked, press
3. Mode Selection: Press
a. Auto : adjustable temperature range 12~40℃
b. Heating : adjustable temperature range 18~40℃
c. Cooling : adjustable temperature range 12~30℃
4. Turbo/ Smart/Silence mode selection:
①
Smart mode as default will be activated when heat pump is on, and screen shows
② Press
to enter Turbo/Booster mode, and screen shows
shows . Press
Attention:
a. When use the Turbo mode, you should select it every time, the machine will not automatically enter the Turbo mode.
b. During the Turbo mode, when the machine reaches the set temperature, it will automatically return to the smart
mode.
5. Defrosting
a. Auto Defrosting: When heat pump is defrosting,
b. Compulsory Defrosting: When heat pump is heating, press
defrosting, and
(Note: Compulsory defrosting intervals should be more than 30 minutes and the compressor should run for more
than 10 minutes.)
6. Temperature display conversion between ℃ and ℉:
" together for 5 seconds to switch between ℃ and ℉.
Press " " and "
7. Wifi setting
Please kindly check the last page.
for 3 seconds to light up screen, then press
to select mode.
again, the screen shows
will be flashing. After defrosting,
to power on heat pump.
or to display or adjust the set temperature.
, then press
and return to Smart mode.
will be flashing. After defrosting,
and
will stop flashing.
- 10 -
.
to enter Silence mode, the screen
will stop flashing.
together for 5 seconds to start compulsory
FOR USER