PCE Instruments PCE-TDS 200 Serie Bedienungsanleitung Seite 37

PCE-TDS 200+
Heat quantity
Heat output
Cost
5.1.7 Alert
The configuration for the visual and audible alarm of the meter is carried out in the Alert menu.
Five modes are available for monitoring.
Mode
Off
Above
Below
Window mode
Inverse window mode
In addition to selecting the alert mode, the measured parameter to be monitored can be selected
under the menu item Measured parameter.
The limit values can be set under the menu item Limits by selecting the respective menu item
with the help of an input dialogue.
Joules
Kilojoules
Megajoules
Watt hours
Kilowatt hours
Megawatt hours
British thermal units
Kilo British thermal units
Mega British thermal units
Watts
Kilowatts
Megawatts
Joules per hour
Kilojoules per hour
Megajoules per hour
British thermal units per hour
Kilo British thermal units per hour
Mega British thermal units per hour
Euros
Pounds
Dollars
Turkish lira
Złoty
Yuans
The costs per unit of heat quantity (for example costs per kWh) can
be entered via a dialogue by selecting the menu item Costs per
unit.
Description
The alarm is deactivated.
The alarm is triggered when the measured parameter exceeds
the upper limit value.
The alarm is triggered when the measured parameter falls below
the lower limit value.
The alarm is triggered when the measured parameter lies
between the upper and the lower limit value.
The alarm is triggered when the measured parameter lies
outside the range between the upper and the lower limit value.
© PCE Instruments
34
[J]
[kJ]
[MJ]
[Wh]
[kWh]
[MWh]
[Btu]
[kBtu]
[MBtu]
[W]
[kW]
[MW]
[J/h]
[kJ/h]
[MJ/h]
[Btu/h]
[kBtu/h]
[MBtu/h]
€
£
$
TL
Zł
¥