Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
To set a thermocouple type, select the Type menu item for the desired channel with the OK key.
The thermocouple type displayed in the menu item on the right now appears in orange. With the
arrow keys UP/DOWN, you can now select between the different types (B,E,J,K,N,R,S,T). The
setting is adopted by confirming with the OK key again.
To enter an offset, select the corresponding menu item by pressing the OK key. A dialogue for
entering the offset opens.
Here, each decimal place can be selected with the RIGHT/LEFT arrow keys and edited with the
UP/DOWN arrow keys.
5.1.6
Units
This menu allows you to set the units of all measured parameters. The following chart shows the
available units.
Parameter
Dimensions
Flow velocity
Volume flow
Volume
Temperature
Fig. 4 Input dialogue offset channel 1
Unit
Millimetres
Inches
Metres per second
Feet per second
Cubic metres
Litres
USA gallons
Imperial gallons
Million USA gallons
Cubic feet
USA barrels
Imperial barrels
Oil barrels
The time can be specified per day, per hour, per minute and per
second.
Cubic metres
Litres
USA gallons
Imperial gallons
Million USA gallons
Cubic feet
USA barrels
Imperial barrels
Oil barrels
Celsius
Fahrenheit
© PCE Instruments
33
Abbreviation
[mm]
[in]
[m/s]
[ft/s]
[m³]
[l]
[gal]
[igl]
[mgl]
[cf]
[bal]
[ib]
[ob]
[m³]
[l]
[gal]
[igl]
[mgl]
[cf]
[bal]
[ib]
[ob]
[°C]
[°F]
Werbung
Inhaltsverzeichnis
