Functions - Klarstein RHONE 25 DUO Bedienungsanleitung

EN
52
Fan Mode
• Lightly touch and hold the UP key for 5 seconds and then touch the POWER
key three times
• Use the UP and DOWN keys to select the fan mode . The factory default set-
ting is F0.
F0: Silent mode Energy saving mode
F1: DynaClima mode half time
F2: DynaClima mode full time
• Touch the POWER key to confirm your selection.
• Touch and hold the UP key for 5 seconds to leave settings mode. Otherwise
the appliance exits settings mode automatically after approximately one
minute.
Audible Tones
• Lightly touch and hold the UP key for 5 seconds and then touch the POWER
key four times
• Use the UP and DOWN keys to sele ct the audible tones . The factory default
setting is S1.
- S0: sensor tone ON , alarm tone OFF
- S1: sensor tone ON, alarm tone ON
- S2: sensor tone OFF, alarm tone OFF
- S3: sensor tone O
- FF, alarm tone ON
• Touch the POWER key to confirm your selection.
• Touch and hold the UP key for 5 seconds to leave settings mode. Otherwise
the appliance exits settings mode automatically after approximately one
minute.

FUNCTIONS

Temperature display
During normal operation, the temperature display on the control panel show s the
temperature inside the appliance. The temperature display will flash if
• A different temperature is being set,
• The temperature in t he zone deviates by more than 5 °C ( from the set tem-
perature.
The temperature display flashing ensures that the temperature can not rise or fall
unnoticed and impair the wine.
Temperature memory function
In the event of a power interruption (power surge, breaker switch, etc.), the unit
remembers the previous temperature settings. When the power is recovered,
the cabinet temperature will go back the same setting temperature as before the